Hot Water & Direct fired Single/Double effect Absorption Chiller

Product Description

WithAir® Hot Water Absorption Chiller ,adopts hot water to make cool (including to use hot water from solar).

Features and Benefits

—— Product Features ——

Cooling capacity: from 18Ton and above .

 Fuel: Natural gas or diesel oil or bios.

Refrigerator: Water.

 Absorber: Lithium bromide solution.

 Inhibitor: Lithium chromate or Lithium molybdate.

 Working pressure: 0.1 or 0.4 or 0.6 or 0.8MPa.

Technical Parameters

Model W02C3-			18GH	30GH	58GH	86GH	114GH	175GH
Cooling capacity	Hot water + Fuel	kW	63.3	105.5	204.0	302.5	400.9	615.5
		Ton	18	30	58	86	114	175
		10⊃3;kcal	54.4	90.7	175.4	260.1	344.7	529.2
		Btu/h	216,000	360,000	696,000	1,032,000	1,368,000	2,100,001
	Hot water only	kW	38.7	63.3	123.1	186.4	242.7	369.3
		Ton	11	18	35	53	69	105
		10⊃3;kcal	33.3	54.4	105.8	160.3	208.7	317.5
		Btu/h	132,000	216,000	420,000	636,000	828,000	1,260,000
Heating capacity		kW	56.3	95.0	186.4	281.4	372.8	569.8
		Ton	16	27	53	80	106	162
		10⊃3;kcal	48.4	81.7	160.3	241.9	320.6	489.9
		Btu/h	192,000	324,000	636,000	960,000	1,272,000	1,944,001
A/C water	Cooling	°C	12/7 (11/8 hot water use only)
	Heating	°C	55.4/60
	Flow rate	m⊃3;/h	10.0	16.4	32.8	49.1	76.0	100.0
	Pressure drop	kPa	80
	Pipe diameter	DN	40	50	65	80	100	125
Hot water	Flow rate	m⊃3;/h	8.6	14.3	28.5	42.8	57.0	86.0
	Inlet/outlet Temperature	°C	90/85
	Pipe diameter	DN	40	50	65	80	100	125
	Pressure drop	kPa	80	80	90	90	90	100
Cooling water	Flow rate	m⊃3;/h	18.0	30.0	60.0	90.0	120.0	180.0
	Inlet/outlet Temperature	°C	32/35
	Pipe diameter	DN	40	50	65	100	125	125
	Pressure drop	kPa	80	80	80	90	90	100
Consumption	Natural gas(cooling/heating)	Nm⊃3;/h	5.8/6.1	9.5/9.9	19.0/19.8	28.5/29.7	38.0/39.6	58.0/60.0
Consumption	Electricity	kW	0.75	0.9	1.7	2.1	2.5	3.8
Dimension	Length	mm	1,700	1,900	2,820	2,550	3,300	4,000
	Width	mm	1,450	1,600	1,950	2,300	2,400	2,500
	Height	mm	1,800	2,000	2,200	2,450	2,450	2,450
Weight	Net weight	kg	1,600	2,500	3,300	4,800	6,500	8,600
Weight	Gross weight	kg	1,800	2,700	3,600	5,100	6,800	9,100

The data in the above table test as following:

1. The burning calorific value of town gas is 10kmh/m⊃3;;

2. Optional parts:cooling water tower, chilled water pump, cooling water pump, hot water adjusting valve, filter of chilled & cooling water, vacuum pump;

3. Fouling factor for chilled water,cooling water and hot water :0.086m⊃2;·h·°C/kW(0.0001m⊃2;·h·°C/kcal);

4. The standard gague pressure limit for chilled water,cooling water and hot water lower than 0.8Mpa;

5. The data in this table are for reference only, please following the nameplate parameter of this product.

Packaging & Transportation

-
Wi thAir ® pr ovide s two styles package for different transporation modes:
(1). St andard package(free of charge): heat pump is wrapped with plastic film, which is suitable for container shipment & a few transshipment cargo;

(2). Special pac kage(extra charge): heat pump is wrapped with plastic film and wooded box, which is suitable for bulk cargo transporation;

Optional Installation Accessories

In order to service heat pumps system installation for clients, WithAir® also provide pressional Parts & Supplies and Technical Information for your engineering support,research and repair, such as: Thermostat Controls, Cooling Towers,Heat Exchangers, Insulation Materials, Water Tank, Expansion Tank, Water Pumps, Water Valves, Flow Gague, Pressure Gauge, Air Duct, Filters, Hydraulic Module (kits) and so on.

Please take a look at Parts & Supplies lines for more information.