Withair® Modular Air-Cooled Heat Pump Unit is a very intelligent heat pump system with flexible capacity output. It could adjust heating capacity output automatically according to requirements. It is much more energy-saving with a long lifespan.

 

Withair® Modular Air-Cooled Heat Pump Unit is a kind of central air conditioner which adopts air as the cooling & heating source and water as cooling & heating medium. With rich experience in R&D, design and application, Withair® constantly lanuched new environment-friendly modular units, which improves the structures, systems and programs based on original products, and designs special series of comfortable and technological units. The environment-friendly modular unit has complete functions and various specifications, with basic modules of any combination available for different models. Withair® offer quiet, reliable, energy efficient equipment. These units incorporate high quality compressors, state-of-the-art coil design, and innovative packaging. As a sort of integrated equipment, it needs no cooling tower, cooling water pump, boiler and corresponding auxiliary parts, which makes the system more simple, saves installation space, convenient maintenance and energy saving, thus it is very suitable for areas that are short of water. several modules can be formed in to a air-cooled heat pump module unit by connecting each module's inlet & outlet pipeline in parallel. with a system without cooling water, with simple pipelines, moderate cost, short construction period, allowing staged investment, the whole unit consists of 1~16 modules and the maximum capacity is 9,040kW.

Withair® Modular Air-Cooled Heat Pump Unit can be widely applied to civilian projects and industrial projects, such as hotel, villa, restaurant, hospital, factory, etc. it is a wise choice for areas where water is insufficient or there are strict limits on  noise level and surroundings. Each unit is verified for total unit performance before shipping to insure quality standards are inherent in every unit.

Unit adopts modular design, relatively independent modules units can be any combination and through microcomputer for centralized control, unit according to the change of load start-stop corresponding number of module unit to adjust the supply of cold (heat) capacity, to achieve the goal of high efficiency and energy saving. Units can effectively under the climatic conditions of heating at -20℃ and heat unit during normal operation the system is 3 times more than ordinary electric heater, winter climate is relatively low and no boiler or other heating conditions particularly applicable areas. with FCU, VAV and AHU and fresh air units, semi-central air conditioning system has the flexible layout, beautiful shape, saving space, convenient adjustment, low running noise, etc.

R410A CLASSICAL MODULAR UNIT

The new generation environment-friendly modular air-cooled unit is based on years of experience in R&D and design, which is greatly improved in aspects of the structure, system and microcomputer control technology, providing wider operation range of refrigeration and heating, and higher adaptability to applications with requirements on comfort and technology. There are basic modules of any combination available for different models, and at most 16 modules can be connected in parallel.

—— Excellent Capacity ——

Units of the same model or different models can be combined freely. Each group can combine up to 16 modules.

—— Intelligent Defrosting Technology, Non-stop When Defrosting ——

The unit control system can determine whether defrosting is necessary according to the ambient temperature in heating mode, evaporating temperature and running time; when defrosting conditions are met, the unit will automatically activate the defrosting program to complete defrosting within a short time and provide heating operation efficiency up to over 90% , ensuring the optimum heating capacity and high COP.

—— Free Master Module Design ——

Any single unit can operate as the master once connected with the wired controller. It overcomes the problem that the whole system would fail to work properly when the fixed master unit malfunctions.

—— Intelligent Air Volume Management ——

The shared duct system is adopted to greatly expand the operating range. The single-module unit can automatically increase or reduce fans based on the ambient temperature to achieve optimal matching between air volume and load and deliver outstanding performance.

—— Intelligent Energy Management Technology ——

The Unique intelligent energy regulation technology in multi-module combination ensures that each module loads or unloads a refrigerant circuit before loading or unloading other refrigerant circuits in the single module, thereby providing higher efficiency, stability and IPLV.

—— Widely Operation Range ——

        Low temperature cooling: 5°C ~ 48°C

        High temperature heating: -15°C ~ 48°C

—— Compact Design And Smaller Footprint ——

Unique and compact structure results in small size and occupied area, significant reductions in installation space and cost; the unit is compact and easy to install. A 136kW unit covers floor space of only 2.4m2, a 50% reduction compared to its equivalents.

—— Reliable Hermetic Scroll Compressor ——

Unit adopt reliable hermetic scroll compressor, which is high efficient, energy saving and operates stably, with low noise, slight vibration and long service life.

—— V-Shaped Condenser ——

The V-shaped condenser has used condenser has used an integral reinforcing metal frame, internal thread and tripe anti-frosting features (patented design of open-window hydrophilic aluminum foil + bottom elevated + one-way valve), providing higher structural stability and corrosion resistance; with heat exchange efficiency improved through full use of heat exchange area, low tendency to dust accumulation and frosting in winter, low loss of pressure, smoother drainage and higher reliability.

—— Efficient Shell And Tube Heat Exchanger ——

The waterside efficient shell and internal thread heat exchanger is of helical baffle type, with better heat transfer performance and higher resistance to freezing than plate heat exchanger, lower water resistance and lower requirements for water quality.

—— Saw-shaped Condenser Fan Blades ——

Compared to plastic impellers, the saw-shaped condenser fan blade provide large air volume, high durability and high air supply efficiency with low noise.

—— High Precision Electronic Expansion Valve ——

The electronic expansion valve achieves 480 regulating range, supplemented by Withair's patented precision throttle control technology to realize dynamic matching in refrigerating system, fully improve the optimum efficiency of each component and ensure the optimum condition of system operation pressure and temperature.

—— New R410A Environment-friendly Refrigerant ——

R410A environment-friendly refrigerant does not contain chlorine which destroys the ozone layer, and the ozone layer destruction system (ODP) is zero. At the same time, it effectively reduces CO2 emission, has stronger anti-low temperature ability and higher cooling efficiency.

—— In House Engineered Microprocessor Control ——

The Withair control panel is fully upgraded based on origin control panels with years of experience in R&D and design, which combines more functions including phase sequence detection, current detection, RS-485 communication interface, delivering stronger performance, utility, standardization, convenience and universality. The USB interface is so provided to facilitate later-stage maintenance and upgrade of control function. The panel is supplemented by Withair developed control program which offers full operation control and multiple safety protection functions.

—— Multiple Protection Functions, Providing Safety And Reliable ——

The unit has multiple safety protection functions which ensure safety and stable operation of the unit and systems. 

The water flow switch and multiple anti-freezing program designs protect the unit and systems in an all-round way.

—— Super Protection Function To Ensure The Safety Of System Operation ——

The unit is equipped with a fully functional protection module, with the industry‘s most complete 13 kinds of safety protection

functions and powerful fault diagnosis function as follows:

Power phase loss, reverse phase protection;

Current overload protection;

Insufficient water flow protection;

Frost protection;

Pump overload protection;

Water pump linkage protection;

Fan motor overload protection;

Compressor exhaust pressure is too high protection;

Compressor return air pressure is too low protection;

Compressor exhaust temperature is too high protection;

Compressor intelligent scroll temperature protection;

Cooling operation cooling water temperature is too low protection;

Overheating protection of cooling water temperature in heating operation;

—— New Touch-wire Controller, Easy To Control The System ——

A set of wire controller can meet up to 16 modules parallel at the same time to achieve centralized control, and users can know the operation and fault state of the unit through the wire controller in time.

—— Ultra-low Temperature And Wide Temperature Working Conditions Operation ——

    

The reliable operating range of  Withair series module unit is -26℃~48℃, when ambient temperature at -26℃,

unit still can be strong heating, which can realize the stable operation under the wide temperature range of -26℃~48℃.

R410A TOTAL HEAT RECOVERY MODULAR UNIT

Withair's total heat recovery modular air-cooled chiller & heat pump unit uses the environment-friendly refrigerant R410A and combines the features of Withair's air-cooled chiller & heat pump unit and air-source heat pump water heater unit. It has five modes: A/C cooling, A/C heating, heat recovery, heat pump water heating, A/C heating + heat pump water heating, widely applied in places requiring central air conditioning and water heating, such as: hotels, schools, restaurants, hospitals, villas, bath centers and industry use.

—— Free Domestic Hot Water ——

In the A/C cooling mode, the unit can recover waste heat and provide free domestic hot water to 55℃. The unit replaces the boiler to meet the user needs for hot water, saves initial investment, eliminates the need for machine room, and saves the building area and energy for environmental protection.

—— Less Occupied Area ——

A single module covers a floor area of only 1.86m2 which is the smallest in the industry, leaving larger valuable space for customers. The unit can substitute the boiler, eliminates the need for machine room, and saves initial investment and building area.

—— Compact Design And Complete Functions ——

In the A/C cooling mode, the unit can recover waste heat and provide free domestic hot water to 55℃. The unit replaces the boiler to meet the user needs for hot water, saves initial investment, eliminates the need for machine room, and saves the building area and energy for environmental protection.

—— Efficient Components Providing Higher Efficiency —— 

The unit employs efficient shell and tube heat exchanger, fan, and heat recovery unit, with optimized pipeline design, providing comprehensive energy efficiency up to 8.24 under conditions of cooling + heat recovery.

TOTAL HEAT RECOVERY OPERATION MODE

There are five operation modes including cooling, heat recovery, A/C heating, heat pump water heating, heating + heat pump water heating, which satisfy the user needs for air conditioning throughout the year and provide domestic hot water.

—— Cooling Mode ——

In summer or transition season needing cooling but not hot water, this mode can be used. In such case, the unit operates for cooling only, just like a standard air-cooled heat pump unit.

—— Heating Mode ——

In circumstances where only domestic hot water is needed instead of cooling or heating, this mode can be used. In such case, the unit only provides domestic hot water, just a standard air source heat pump water heater unit.

—— Heat Recovery Mode ——

In circumstances where both cooling and production of domestic hot water are needed, this mode can be used. In such case, the unit automatically selects the optimal operation mode based on the needs for air conditioning and water heating to produce chilled water for air conditioning and domestic hot water for everyday use.

—— Heat Pump Water Heating Mode ——

In circumstances where only domestic hot water is needed instead of cooling or heating, this mode can be used. In such case, the unit only provides domestic hot water, just like a standard air source heat pump water heater unit.

—— Heating + Heat Pump Water Heating Mode ——

In winter or other circumstances where both heating and domestic hot water are needed, this mode can be used. In such case, the water heating mode is preferred by default to ensure use of domestic hot water; then at the “idle time” when the demand for hot water is satisfied, the unit automatically switches to the heating mode to meet the needs for heating. Users may set the heating mode as the priority as required to ensure heating effect.

R410A YEAR-ROUND COOLING MODULAR UNIT

Withair's new generation of year-round cooling modular unit is applicable for industrial applications, and requirements on energy saving and environment protection. It can operate for refrigerant at the ambient temperature of -10℃~48℃ all the year round, with environment friendly refrigerant R410A, advanced electronic expansion valve control technology, efficient shell and tube heat exchanger, EC fan with steplless speed regulation, fully meeting the requirements of various industry applications for chilled water throughout the year.

—— Widely Operation Range of Cooling ——

The modular water chiller unit is specially designed and can run in all weathers at the ambient temperature of -10℃~48℃.

—— EC Fan With Stepless Speed Regulation ——

The condensate fan employs the EC motor of which the speed is variable between 20%~100% to ensure that condensing pressure is within the range of safe operation under all conditions for longer service life.

—— The Key Advantages Include ——

● ECO friendly refrigerant R410a, R407c.

● Flexible configurations with top or side piping and  front or side control box.

● Large panels for accessibility to compressor and controls sections

● Plate type, coaxial tube-in-tube heat exchanger for high performance, reliability, and resistance to freezing.

● Multi-function: provide cooling only, cooling with hot water, heating only and heating with hot water, hot water, total heat recovery, partial heat recovery for domestic hot water heating (55℃).

● Unit choose efficient rotary or scroll compressor, the use of high efficient heat exchanger technology processing, condensation temperature greatly reduced.

● When multiple units were combined into a system, because each unit can be individually ON/OFF; wide range of system energy regulation and running costs fell by more 40%.

● Unique compressor anti-vibration technology (patent ZL 2020 2 0246589.1) and sound attenuation material ensure ultra-quiet performance.

● Advanced microcomputer automatic control system, with protection of high and low pressure, overload, low voltage, phase lack, and low temperature etc., with terminal for the external pumps, and displays and alarms malfunction.

● Running ambient range from -20℃ to 50℃.

● Built-in hydraulic module for option.

● Multi-system design and wear-and-tear management technology reduces electric impulse and extend service life.

● Modular network function: unit control system is equipped with the network communication, the user can control operating units quantity according to the actual use load, make user side water system utilities, to realize the automatic device management automation and energy management.

● Smart microchip control and large LCD user interface, capable of one-key startup.

● Automatic intelligent reset. Unit shall automatically restart 5 minutes after shutdown if the fault has cleared. Should a fault occur 3 times sequentially, then lockout will occur.

● Humanized design, widened application scope: the unit’s temperature settings for room, hot water, water intake/outlet, freeze protection, and compressor exhaust can be adjusted on-site according to environmental conditions.

● Communication adapter connection the unit to BMS(Building Management System) is an optional accessory, please get in touch with us or our distributor if required.

● Unit with multi-protection to guarantee the unit running stability and security, such as: high/low voltage, low oil level protection, exhaust temperature, antifreeze, power lack/reverse phase, water system cut off. operating condition with small change range stable operation, safe, reliable and long service life.

● Easy installation,  simple water piping system configuration, you can make design partition and divide second installation.

● Quality components selection

   Compressors and refrigeration accessories (such as dry filter, thermal expansion valve, liquid supply solenoid, liquid level mirror, high/low pressure control devices) all chosen world-renowned brand products to ensure that the unit reached an excellent level of performance. Using the most advanced DAE / DAC efficient heat transfer pipe, heat transfer surface with internal ribbed tube makes the heat transfer coefficient substantially increased; the heat exchanger unique structural design, the best way of copper tube layout and precision of refrigerant control technology, greatly improved the efficiency of heat transfer.

● Perfect control

     1) Computerized control with standby manual operation system

     2) Compressor Operation timing

     3) Compressor automatic start-up sequence,

     4) Alarm signals

     5) Alarm reset

     6) Water temperature control

     7) Manual reset high pressure switch, Automatic reset low pressure switch

● Equipped self-diagnosis function, and automatically eliminate software problem

● Protections that ensure its safe and stable operation:

1) Reverse phase

2) Lack phase

3) High/low pressure

4) Gas discharge

5) Outlet water temperature too low (high)

6) Water stopped

7) Antifreeze

8) Compressor overheat etc.

● All the components covered with casing, keeps damages to cooling and electrical system away.

● Small size, light weight, easy for installation, transfer and maintenance, can be put into use just make water pipes and the power supply cable be connected at the site.

● EVI compressor as option. EVI compressor-enhanced vapor injection, Vapor-injected method can effectively improve heat capacity, prevent higher discharge temperature of compressor and guarantee operating stability of unit at low temperature). 

● STRUCTURE

      Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance  

      to atmospheric agents.

● HERMETIC SCROLL COMPRESSORS

      Single phase type and 3-phase scroll type compressors, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.

● EVAPORATOR & CONDENSER

      High efficiency plate type heat exchanger, tube in tube heat exchanger, shell and tube heat exchanger, factory-insulated with flexible close cell material.

● REFRIGERANT CIRCUIT

      Copper tube connection with charge valves, filter, thermostatic expansion valve, gas-liquid separator, high pressure switch and low pressure switch. The heat pump units are complete also with 4-way valve and one way valve.

● HYDRAULIC CIRCUIT

      No build in water circuit as standard.

● ELECTRIC PANEL

      Consists of: Compressor contactor, Compressor protection breaker, Microprocessor with function display.

● OPTIONAL PARTS

Source side water flow switch, source side water pump, & user side water flow switch, user side water pump,  hot water pump

Expansion tank

Metallic filter for the water circuit

Build in water circuit

Modular type

Heat recovery for domestic hot water (55℃)

—— You May Like ——

---

                              

Air Cooled Heat Pump        +        Fan Coil Unit        +        Variable Air Volume Unit      +     Air Handling Unit     +    Insulation materials       +      Thermostat

                                                                                                                    

—— Specifications (ON/OFF Version , Standard Single Modular Unit) ——

Model No.			W01R1-72	W01R1-105	W01R1-140	W01R1-175	W01R1-210	W01R1-280	W01R1-363	W01R1-565
Nominal cooling capacity		kW	72	105	140	175	210	280	363	565
		US.RT	20	30	40	50	60	80	100	160
		EER	3.35	3.36	3.33	3.35	3.36	3.38	3.38	3.35
Nominal heating capacity		kW	76	112	147	185	222	295	382	592
		US.RT	21.6	31.8	43.2	54.3	64.8	87.0	108.5	174.0
		COP	3.69	3.61	3.58	3.67	3.66	3.66	3.65	3.65
Power supply			380V/3P/50Hz (400V/415V/3P/50Hz, 230V/380V/460V/3P/60Hz   as option)
Compressor	Type		Advanced fully hermetic scroll compressor
	Brand name		Daikin, Copeland, Hitachi, Panasonic, Mitsubishi as option
	Quantity		2	2	2	4	4	4	8	8
	Input   power	kW	19.2	27.0	36.0	46.7	56.1	74.5	96.9	150.6
Safe protection device			High/low pressure switch, overload protection, counter clock wise and   short phase protection (power   phases sequence protection),lack water(water-flow switch),anti-freezing   protection, etc.
Air side heat exchanger (Condenser)	Type		High efficiency exchanger copper tube and aluminum fin coil
	Air flow volume	m³/h	24000	36000	45000	76000	112000	142000	168000	284000
	Fan motor type		Low noise, high efficiency, waterproof and weatherproof axial flow   type
	Fan motor power	kW	1.4	2.0	2.8	4.5	6.0	9.2	11.7	17.1
Water side heat exchanger (Evaporator)	Type		High efficiency shell-and-tube heat exchanger
	Water flow rate	m³/h	11.7	16.5	21.4	29.3	35.6	44.8	58.5	90.2
	Water pressure drop	kPa	40 ~ 80
	Max. working pressure	MPa	1
Dimension	Length*width*height	mm	2065*1030*1974	2316*1306*2360		4360*2290*2020		4710*2290*2020	5650*2260*2590	9420*2290*2590
Noise level		dB(A)	65	68	71	73	74	76	78	83
Water proof level			IPX4
Electric shock protection			I
Refrigerant	Type		HFC- R410A
	Charging rate	kg	16	25	30	43	55	62	84	128
Net weight		kg	840	1350	1880	2720	3150	3860	4290	7850
Entering/leaving water pipe		Inch	2-1/2“	2-1/2“	2-1/2“	3“	3“	3“	3“	3“
Optional auxiliary electric heater		kW	15	25	30	50	60	60	80	100
Control type			Wired control, manual or automatic start up, the running status   display and malfunction alarm, etc.

Notes: 

1. Nominal cooling operating conditions: entering chilled water temperature 12℃, leaving temperature 7℃; outdoor dry bulb temperature 35℃,wet bulb temperature 24℃.

    Nominal heating operating conditions: entering hot water temperature 40℃,leaving temperature 45℃; outdoor dry bulb temperature 7℃,wet bulb temperature 6℃;

2. The controllers need to ordered separately, including wire controller, communication line, IOM, temperature sensor and water flow switch.

3. These parameter were tested according to pure water, not include anti-freezing liquid and water pump power.

4. Chiller unit without heating parameters.

5. In actual use, the cooling/heating loss should be considered after the installation of the system piping, pumps, valve, dirt, etc. about 6%.

6. For other working conditions or capacity parameters, please contact Withair for cooling ambient condition under 5℃.
7. There will be no further notice if the parameters changes due to product optimization.
8. The units of the same model or different models can be combined freely. Each system can combine up to 16 modules.
9. Manufacturer reserves the right to make changes to above specifications without prior notice, please refer to the factory configuration when purchasing.

Conditions	Water   side				Air side
	Nominal   working condition		Working range		Nominal   working condition	Working range
	EWT   (℃)	LWT (℃)	EWT   (℃)	LWT (℃)	Dry bulb temperature (℃)	Dry bulb temperature of outdoor (℃)
Cooling	12	7	5 ~ 15	2.5 ~ 8	35	12 ~ 50
Heating	40	45	30 ~ 50	2.5 ~8	7	- 26 ~28
Note: LWT - leaving water temperature, EWT - entering water   temperature

—— Various Models Combines Capacity Parameter Table ——

Model & modular quantity	W01R1-72	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Cooling capacity	kW	72	144	216	288	360	432	504	576	648	720	792	864	936	1008	1080	1152
Heating capacity	kW	76	152	228	304	380	456	532	608	684	760	836	912	988	1064	1140	1216
Water flow rate	m3/h	11.7	23.4	35.1	46.8	58.5	70.2	81.9	93.6	105.3	117	128.7	140.4	152.1	163.8	175.5	187.2

Model & modular quantity	W01R1-105	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Cooling capacity	kW	105	210	315	420	525	630	735	840	945	1050	1155	1260	1365	1470	1575	1680
Heating capacity	kW	112	224	336	448	560	672	784	896	1008	1120	1232	1344	1456	1568	1680	1792
Water flow rate	m3/h	16.5	33	49.5	66	82.5	99	115.5	132	148.5	165	181.5	198	214.5	231	247.5	264

Model & modular quantity	W01R1-140	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Cooling capacity	kW	140	280	420	560	700	840	980	1120	1260	1400	1540	1680	1820	1960	2100	2240
Heating capacity	kW	147	294	441	588	735	882	1029	1176	1323	1470	1617	1764	1911	2058	2205	2352
Water flow rate	m3/h	21.4	42.8	64.2	85.6	107	128.4	149.8	171.2	192.6	214	235.4	256.8	278.2	299.6	321	342.4

Model & modular quantity	W01R1-175	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Cooling capacity	kW	175	350	525	700	875	1050	1225	1400	1575	1750	1925	2100	2275	2450	2625	2800
Heating capacity	kW	185	370	555	740	925	1110	1295	1480	1665	1850	2035	2220	2405	2590	2775	2960
Water flow rate	m3/h	29.3	58.6	87.9	117.2	146.5	175.8	205.1	234.4	263.7	293	322.3	351.6	380.9	410.2	439.5	468.8

Model & modular quantity	W01R1-210	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Cooling capacity	kW	210	420	630	840	1050	1260	1470	1680	1890	2100	2310	2520	2730	2940	3150	3360
Heating capacity	kW	222	444	666	888	1110	1332	1554	1776	1998	2220	2442	2664	2886	3108	3330	3552
Water flow rate	m3/h	35.6	71.2	106.8	142.4	178	213.6	249.2	284.8	320.4	356	391.6	427.2	462.8	498.4	534	569.6

Model & modular quantity	W01R1-280	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Cooling capacity	kW	280	560	840	1120	1400	1680	1960	2240	2520	2800	3080	3360	3640	3920	4200	4480
Heating capacity	kW	295	590	885	1180	1475	1770	2065	2360	2655	2950	3245	3540	3835	4130	4425	4720
Water flow rate	m3/h	44.8	89.6	134.4	179.2	224	268.8	313.6	358.4	403.2	448	492.8	537.6	582.4	627.2	672	716.8

Model & modular quantity	W01R1-363	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Cooling capacity	kW	363	726	1089	1452	1815	2178	2541	2904	3267	3630	3993	4356	4719	5082	5445	5808
Heating capacity	kW	382	764	1146	1528	1910	2292	2674	3056	3438	3820	4202	4584	4966	5348	5730	6112
Water flow rate	m3/h	58.5	117	175.5	234	292.5	351	409.5	468	526.5	585	643.5	702	760.5	819	877.5	936

Model & modular quantity	W01R1-565	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
Cooling capacity	kW	565	1130	1695	2260	2825	3390	3955	4520	5085	5650	6215	6780	7345	7910	8475	9040
Heating capacity	kW	592	1184	1776	2368	2960	3552	4144	4736	5328	5920	6512	7104	7696	8288	8880	9472
Water flow rate	m3/h	90.2	180.4	270.6	360.8	451	541.2	631.4	721.6	811.8	902	992.2	1082.4	1172.6	1262.8	1353	1443.2

—— Performance Parameter Correction Coefficient Table in Different Conditions ——

Cooling capacity

LWT (℃)	Ambient temperature (℃)
	20		25		30		35		40		45
	Cooling capacity	Input power	Cooling capacity	Input power	Cooling capacity	Input power	Cooling capacity	Input power	Cooling capacity	Input power	Cooling capacity	Input power
5	1.07	0.74	1.02	0.81	0.98	0.89	0.94	0.99	0.90	1.06	0.85	1.19
7	1.14	0.76	1.08	0.82	1.04	0.90	1.00	1.00	0.96	1.09	0.92	1.20
9	1.20	0.78	1.15	0.84	1.11	0.92	1.07	1.02	1.03	1.10	0.98	1.23
12	1.29	0.80	1.26	0.86	1.21	0.94	1.16	1.03	1.12	1.12	1.08	1.25
15	1.39	0.82	1.35	0.88	1.30	0.95	1.26	1.05	1.22	1.16	1.18	1.27
Note: LWT - leaving water   temperature, EWT - entering water temperature

Heating capacity

LWT (℃)	Ambient temperature (℃)
	15		10		7		0		-5		-10
	Heating capacity	Input power	Heating capacity	Input power	Heating capacity	Input power	Heating capacity	Input power	Heating capacity	Input power	Heating capacity	Input power
35	1.22	0.95	1.16	0.92	1.07	0.90	0.86	0.82	0.73	0.75	0.65	0.70
40	1.19	1.00	1.13	0.95	1.03	0.92	0.85	0.86	0.72	0.80	0.63	0.73
45	1.16	1.08	1.08	1.04	1.00	1.00	0.81	0.91	0.70	0.82	0.61	0.75
50	1.14	1.12	1.05	1.08	0.98	1.04	0.79	0.94	0.69	0.84	0.58	0.77
Note: LWT - leaving water   temperature, EWT - entering water temperature

Note: Above correction factors adapt to W01R1-72, W01R1-105, W01R1-140, W01R1-175, W01R1-210, W01R1-280, W01R1-363, W01R1-565

● Solution for Hotel : Heat Recovery Air-cooled Heat Pump + FCU + Floor Heating + Fresh Air Unit + Heat Pump Water Heater

System Introduction:

In addition to reliably guaranteeing the use of air conditioners, this system can also guarantee 24/7 hot water supply; in the cooling season, users can get free hot water while using air conditioners for cooling; the cooling water system is omitted, and low the initial investment. ; Dual-purpose cooling and heating, no additional heating system is required; different air handling equipment can be configured according to the needs of different functions, such as fan coil units, variable air volume units, fresh air units, air handling units, etc.; modular configuration of the unit, it can realize non-stop maintenance; intelligent control, realizing quasi-linear energy adjustment with load changes, the system does not need a dedicated machine room, so it can release the effective space of the building and realize its economic value.

● Solution for Office Building: Air-cooled Heat Pump + Fan Coil Unit + Fresh Air Unit

System Introduction:

In addition to the reliable protection of the air conditioner, the system eliminates the need for a cooling water system and has a small initial investment; it is dual-purpose for cooling and heating, without the need for additional heating systems; it can be equipped with different air handling equipment, such as fan disks, according to the needs of different functions Tubes, variable air volume units, fresh air units, combined air handlers; the modular configuration of the main engine can realize non-stop maintenance; intelligent control realizes quasi-linear energy adjustment with load changes, so that the system always maintains the highest operating efficiency. The annual operating costs are low. The system does not require a dedicated computer room, so it can release the effective space of the building and realize its economic value.

● Solution for Shopping Mall :  Air-cooled Heat Pump + Air handling Unit + Fresh Air Unit + Variable Air Volume Unit

System Introduction:

According to the characteristics of large flow of people and high demand for air volume in commercial places, the system adopts variable air volume units with large air volume and air handling unit and modular units configuration, which can realize non-stop maintenance; eliminates the need for cooling water system, and has a small initial investment; dual use of cooling and heating , No need to configure the heating system separately; in addition to ensuring the reliable operation of the system, intelligent control realizes quasi-linear energy adjustment with load changes. It can be easily switched to the mode of fresh air during the transition season, so that the system always maintains the highest operating efficiency. The annual operating costs are low. The system does not require a dedicated computer room, so it can release the effective space of the building and realize its economic value.

● Solution for Amusement Building :  Air-cooled Heat Pump + FCU + AHU + Fresh Air Unit + Heat Pump Water Heater

System Introduction:

In addition to reliably ensuring the use of air conditioners, the system can also guarantee 24 hours of hot water supply for 365 days; the cooling water system is omitted, and the initial investment is small; the heating and cooling systems are dual-purpose, without the need for additional heating systems; the modular units configuration can be realized. The system capacity can also be increased at any time according to the operating conditions if the maintenance is disabled; intelligent control realizes quasi-linear energy adjustment with load changes. The system does not require a dedicated computer room, so it can release the effective space of the building and realize its economic value.

-

● 100% test before deliverying products.

● Tracking number will be sent to customer as soon as we ship the products.

● Item shipped in 25 working days against payment depends on the quantity.

● Four steps of pakacges, plastic film, foam, carton and plywood for stable transporation.

Withair® provides two styles package for different transporation modes:

(1). Standard package(free of charge): unit is wrapped with plastic film, which is suitable for container shipment & a few transshipment cargo;

  
(2). Special package(extra charge): unit is wrapped with plastic film and wooded box, which is suitable for bulk cargo transporation;